ET150 Induction Loop Amplifier

ET150 Induction Loop Amplifier

The unit will cover a square room 12m by 12m or a rectangular room 20m by 10m. The unit has three inputs all of which can be microphones, or input 3 can be switched to line level for mixing desk or AV feeds. Selectable Phantom power is available for the microphone inputs.

All the controls on the ET150 are screwdriver adjustable to prevent tampering. Each input has its' own mix control, before passing to a compressor limiter. The compression level (gain reduction) is indicated on a 4 LED bar graph (0 to 18 dB) allowing the user to select the best dynamic range for the application. The drive control sets the output peak current which is indicated on the 5 LED current bar graph (1A to 5A). The unit indicates Power, Loop OK and output stage protect status on the front Panel. The Loop OK Lamp only illuminates when audio is passing through the loop giving a true indication that the loop is functioning.


Rear Panel View:



The three audio inputs on the ET150 are on standard XLR Connections (in accordance with AES3). Inputs 1 & 2 are microphone level and input 3 is selectable between mic and line level using the blue push switch on the rear. Phantom is enabled to all microphone inputs using the red push switch on the rear.

The loop OK output is a 12V feed to drive the ETOK indicator when the loop is operating (this indicator ensures people know the loop has programme material before switching to the T position).

The direct loop monitor allows a pair of standard headphone to be used to listen to the current flowing in the loop (This has been requested by installers to prove the audio from the loop is free of Hum in areas of high background electrical noise).

The loop connections allows up to 2.5mm csa cable to be connected to the amplifier (we recommend using ferrules on the cable ends) to form the loop.

Mains is provided by a standard IEC type inlet, and the unit is provided with an MK type plug for the UK or an earthed Shuko type plug for Europe.

Specifications:

Inputs:
2 mic, -50dB XLR balanced
1 mic/line -50dB / -10dB
Outputs:
Loop Monitor - 1/4" jack
Audio out - 1/4" jack
Loop: Screew terminals
Loop output: >9 Amps peek, 0.1 to 1.0 Ohms
Phantom Power 15V, 2mA

Rack mounting ears available

Details
SKU SKU_16528
 
Our price (ex vat): 262.00
Options
Rack Mounting Ears
Quantity
ETRX Induction Loop Monitor Set
ETRX Induction Loop Monitor Set
74.00
Phantom 250 Moving head lighting effect
Internally Wired Stage Lighting Bar 8 meter length with 6 x 15A outlets
Duracell Procell 9V PP3
Phantom 250 Moving head lighting effect Internally Wired Stage Lighting Bar 8 meter length with 6 x 15A outlets Duracell Procell 9V PP3
595.00
405.00
3.20
 
A1/220 Lamp
Powerdrive Ref35 Followspot Stand
Zero88 FLX Lighting Control Desk
A1/220 Lamp Powerdrive Ref35 Followspot Stand Zero88 FLX Lighting Control Desk
2.40
104.00
3400.00
 
Topdeck Portable Stage Step Unit
Kryolan Bruse Wheel
HTI400 Lamp 400W 24V G22
Topdeck Portable Stage Step Unit Kryolan Bruse Wheel HTI400 Lamp 400W 24V G22
180.00
9.59
170.00